Skip to contents

Creates a Connect peer for a specified transit gateway Connect attachment between a transit gateway and an appliance

Source: R/ec2_operations.R
ec2_create_transit_gateway_connect_peer.Rd

Creates a Connect peer for a specified transit gateway Connect attachment between a transit gateway and an appliance.

See https://www.paws-r-sdk.com/docs/ec2_create_transit_gateway_connect_peer/ for full documentation.

Usage

ec2_create_transit_gateway_connect_peer(
  TransitGatewayAttachmentId,
  TransitGatewayAddress = NULL,
  PeerAddress,
  BgpOptions = NULL,
  InsideCidrBlocks,
  TagSpecifications = NULL,
  DryRun = NULL
)

Arguments

TransitGatewayAttachmentId

[required] The ID of the Connect attachment.

TransitGatewayAddress

The peer IP address (GRE outer IP address) on the transit gateway side of the Connect peer, which must be specified from a transit gateway CIDR block. If not specified, Amazon automatically assigns the first available IP address from the transit gateway CIDR block.

PeerAddress

[required] The peer IP address (GRE outer IP address) on the appliance side of the Connect peer.

BgpOptions

The BGP options for the Connect peer.

InsideCidrBlocks

[required] The range of inside IP addresses that are used for BGP peering. You must specify a size /29 IPv4 CIDR block from the 169.254.0.0/16 range. The first address from the range must be configured on the appliance as the BGP IP address. You can also optionally specify a size /125 IPv6 CIDR block from the fd00::/8 range.

TagSpecifications

The tags to apply to the Connect peer.

DryRun

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.